Single-Mode G657A2 Bend-Optimized Low Loss Bare Optical Fiber

Product Description

Single-Mode G657A2 Bend-Optimized Low Loss Bare Optical Fiber

Product Description

Bending Insensitive Single-mode Fiber
YOFC bending insensitive single-mode fibre combines two attractive features: excellent low macro-bending sensitivity and low water-peak level. It is comprehensively optimized for use in O-E-S-C-L band (1260 -1625 nm). The EasyBand® Plus's bending insensitive feature not only guarantees L-band applications but also allows for easy installation without excessive care when storing the fibre especially for FTTH networks application. Bending radii in fibre guidance ports can be reduced as well as minimum bend radii in wall and corner mountings.

      • Extremely high bending loss resistance in the 7.5 to 15 mm bending radius range
      • Full compatibility with all G.652 fibres for any applications
      • Low attenuation satisfying the operation demand in O-E-S-C-L band
      • Low PMD satisfying high bit-rate and long distance transmission requirements
      • Low bending loss for highly demanding cable designs including ribbons
      • Accurate geometrical parameters that insure low splicing loss and high splicing efficiency
      • High nd-value satisfying long operational lifetime in minimum bend radius

      • All types of fibre cables with different structures
      • High performance optical network operating in O-E-S-C-L band
      • High speed optical routes for Fiber-to-the-Home networks
      • Cables with extreme low bending requirements
      • Small-sized fiber cable and optical component

 

Product Parameters

 

Specifications (G657A2)
Characteristics		Conditions	Specified values	Units
Optical Characteristics
Attenuation		1310nm	≤0.35	[dB/km]
		1383nm(after H2-aging)	≤0.35	[dB/km]
		1460nm	≤0.25	[dB/km]
		1490nm	≤0.23	[dB/km]
		1550nm	≤0.21	[dB/km]
		1625nm	≤0.23	[dB/km]
Attenuation vs. Wavelength		1285-1330nm, in reference to 1310nm	≤0.03	[dB/km]
Max. α difference		1525-1575nm, in reference to 1550nm	≤0.02	[dB/km]
Zero Dispersion Wavelength(λ0)		--	1300-1324	[nm]
Zero Dispersion Slope(S0)		--	≤0.092	[ps/(nm^2·km)]
PMD	Maximum Individual Fibre	--	≤0.1	[ps/√km]
	Link Design Value(M=20,Q=0.01%)	--	≤0.06	[ps/√km]
	Typical Value	--	0.04	[ps/√km]
Cable Cutoff Wavelength (λCC)		--	≤1260	[nm]
Mode Field Diameter(MFD)		1310nm	8.4-9.2	[μm]
		1550nm	9.3-10.3	[μm]
Effective Group Index of Refraction(Neff )		1310nm	1.466	--
		1550nm	1.467	--
Point Discontinuities		1310nm	≤0.05	[dB]
		1550nm	≤0.05	[dB]
Geometrical Characteristics
Cladding Diameter		--	125.0±0.7	[μm]
Cladding Non-Circularity		--	≤0.7	[%]
Coating Diameter		--	235-245	[μm]
Coating-Cladding Concentricity Error		--	≤12.0	[μm]
Coating Non-Circularity		--	≤6.0	[%]
Core-Cladding Concentricity Error		--	≤0.5	[μm]
Curl(radius)		--	≥4	[m]
Delivery Length		--	Up to 50.4	[km/reel]
Environmental Characteristics		1310nm, 1550nm & 1625nm
Temperature Dependence Induced Attenuation		-60ºC to +85ºC	≤0.05	[dB/km]
Temperature-Humidity Cycling Induced Attenuation		-10°C to +85°C, 98% RH	≤0.05	[dB/km]
Watersoak Dependence Induced Attenuation		23°C, for 30 days	≤0.05	[dB/km]
Damp Heat Dependence Induced Attenuation		85°C and 85% RH, for 30 days	≤0.05	[dB/km]
Dry Heat Aging		85ºC, for 30 days	≤0.05	[dB/km]
Mechanical Specification
Proof Test		--	≥9.0	[N]
		--	≥1.0	[%]
		--	≥100	[kpsi]
Macro-bend Induced Attenuation	10 Turns Around a Mandrel of 15 mm Radius	1550nm	≤0.03	[dB]
	10 Turns Around a Mandrel of 15 mm Radius	1625nm	≤0.1	[dB]
	1 Turn Around a Mandrel of 10 mm Radius	1550nm	≤0.1	[dB]
	1 Turn Around a Mandrel of 10 mm Radius	1625nm	≤0.2	[dB]
	1 Turn Around a Mandrel of 7.5 mm Radius	1550nm	≤0.5	[dB]
	1 Turn Around a Mandrel of 7.5 mm Radius	1625nm	≤1.0	[dB]
Coating Strip Force		typical average force	1.5	[N]
		peak force	1.3-8.9	[N]
Dynamic Fatigue Parameter(nd)		--	≥20	--

Certifications

Packaging & Shipping

 

Company Profile

Our Service:
1.Customers solutions in days, not weeks.
2.Warmly services with careful attentions.
3.Can provide your specific inquiry within 24 hours.
4.Save much costs, bring more benefit for customer to expand business. 
5.We have been 10 years experience in this field. We are the prefessional supplier that you can trust.
6.We acknowledge customer's stringent quality demands for optical fiber products and pledge to supply products meeting international standards.

FAQ:
Q1:How can you guarantee the delivery time?  
 
A:1. To avoid the delay, we have built a complete and professional procedure system from production to the deliver and have rich experience.
2. We can regulate the penalty clause in the contract for the late delay.
 
Q2:What's your best price?
A:Based on the quality of our products and the quantity of your estimated. We would quote the great best matching price all the time.
 
Q3:What's your BRAND? 
A:FIBERCLOUD,YOFC,CORNING,OFS...
 
Q4:Can I print our own logo on the product?
A:Yes, Please send your logo to us.
 
Q5:Can you provide OEM/ODM service?
A:Yes, we can. Please tell us the details of your requirements

Q6: How to deal with the faulty?
A: First of all, our products are produced under a strict quality control system, and the defective rate will be less than 0.2%.
Secondly, we will conduct strict quality inspections and issue test reports before shipment to ensure the quality of the products.

Q7:Why choose us to cooperate?
1.  We have first-class production line and strict quality management system.
2.  We have professional procedure system and big production capacity to guarantee fast deliver and on time shipment.
3.  We can provide the most competitive price to meet your budget.
4.  We also design and innovate the new products based on our rich experience .
5.   We have professional team to provide comprehensive one-stop service for you.

Hope this would be a good start for our cooperation!